Price on request
Make an offer| CNC type | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | None |
| status | visible but unplugged |
| Last availability date | 09/03/2026 |
The ABRAZIV CM1500-8 is an industrial shot blasting machine manufactured in 2012, designed for descaling and surface treatment of large castings. It can accommodate work-pieces with a diameter of up to 1500 mm and a height of 2800 mm, supporting a maximum weight of 2000 kg when the distance between the axes of castings is 1650 mm. The machine's robust welded house is made of ST 54 steel with a thickness of 16 mm, and features manganese wear plates also 16 mm thick for enhanced durability.
This machine is powered by eight ABR-501 turbines, each with a diameter of 500 mm, rotating at 2600 rpm and driven by 22 kW motors, providing an abrasive capacity of 350 kg per minute per turbine. Additional electrical components include two bucket elevators (each with a load capacity of 40 m³/h and powered by 7.5 kW motors), two shot material cleaners with an aspiration volume of 2500 m³/h per unit and a capacity of 120 t/h, two double magnet drum-separators with 300 mm diameter drums, dosing bulk units with a volume of 0.7 m³ each, vibrating conveyors, sieves, dust aspiration systems, and a conveyor path.
The total electrical power demand includes 176 kW for turbines, 15 kW for bucket elevators, 1.5 kW for rotation devices, 3 kW for magnet separators, 8 kW for vibrating conveyors and sieves, 22 kW for dust aspiration, and 7.5 kW for the conveyor path. Compressed air requirements are 6 bar pressure at a flow rate of 35 m³/h.
The machine's projected productivity ranges from 18 to 25 loads per hour, depending on the cleaning duration and operational regime (finishing or rough treatment), with a guaranteed performance of at least 22 castings per hour under specified conditions.
Visually, the machine features a large, sturdy structure painted in blue and orange with yellow safety railings and access stairs for operator safety. It includes an overhead conveyor system with multiple large hooks for hanging parts, facilitating efficient handling of work-pieces. A blue operator cabin with ventilation ducts is integrated into the setup. The machine is situated in an industrial warehouse environment, showing typical signs of use such as some dirt and wear on the floor, but the structure appears intact with no visible damage. Safety and warning signs are posted on the panels. A manufacturer plate confirms the model and year, specifying a total motor power of 352 kW, air extraction capacity of 30,000 m³/h, voltage of 3x400V, control voltage of 24V AC/DC, and a total machine weight of 94,940 kg.
This comprehensive design and configuration make the ABRAZIV CM1500-8 suitable for heavy-duty shot blasting applications requiring high throughput and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
1.1.1 Diameter of work-piece –
mm– 1500
1.1.2 Height of work-piece –
mm– 2800
1.1.3 Weight of work-piece (max)/
kg 2000
(at that maximum distance between the axes of castings is 1650 mm)
1.1.4 Energy demand
1.1.4.1 Electrical
-Turbines – (8 pcs. х 22 kW– кВт) kW– 176
- Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15
- Rotation device of casting –
(2 pcs.. х 0,75 kW– кВт) kW 1,5
- Double magnet drum-separator –
(2 pcs.–шт. х 1,5 kW) kW 3
- Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8
- Dust aspiration – kW– 22
- Conveyor path – kW– 7,5
1.1.4.2 Compressed air demand –
- pressure – bar 6
- quantity – m3/h 35
1.1.5 Abrasive charge – kg 8000
1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. –
1.2 Units of machine (given for each element separately) –
1.2.1 Machine house
- Material of welded house – ST 54, thickness 16 mm
- Wear plate material in house – manganese, thickness – 16 mm
1.2.2 Bucket elevator – (2 pcs. per machine)
- Load capacity of 1 pc. – m3/h– 40
1.2.3 Shot material cleaner – (2 pcs. per machine)
- Aspiration volume of 1 pc. – m3/h 2500
- Capacity of 1 pc. – t/h– 120
1.2.4 Double magnet drum-separator –
Diameter mm– 300
1.2.5 Dosing bulk – (2 pcs. per machine)
- Volume of 1 pc. – m3 0,7
- Dosing valve pneumatics (different for under and overhead turbines) –
1.2.6 Turbines – Турбины (8 pcs. per machine )
- number piece 8
- type ABR-501
- diameter– диаметр mm– 500
- wheel rotations/min 1/min– 2600
- motor power kW– кВт 22
- abrasive capacity kg/min/each– 350
1.2.7 Conveyor-path
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | March 3, 2026 |
1.1.1 Diameter of work-piece –
mm– 1500
1.1.2 Height of work-piece –
mm– 2800
1.1.3 Weight of work-piece (max)/
kg 2000
(at that maximum distance between the axes of castings is 1650 mm)
1.1.4 Energy demand
1.1.4.1 Electrical
-Turbines – (8 pcs. х 22 kW– кВт) kW– 176
- Bucket elevator – (2 pcs. х 7,5 kW– кВт) kW– 15
- Rotation device of casting –
(2 pcs.. х 0,75 kW– кВт) kW 1,5
- Double magnet drum-separator –
(2 pcs.–шт. х 1,5 kW) kW 3
- Vibrating conveyor and sieve – (2 pcs. х 4 kW– кВт) kW– 8
- Dust aspiration – kW– 22
- Conveyor path – kW– 7,5
1.1.4.2 Compressed air demand –
- pressure – bar 6
- quantity – m3/h 35
1.1.5 Abrasive charge – kg 8000
1.1.6 Projected productivity is 18-25 loads per hour (quantity of loads depends on the duration of cleaning chosen by operator and on chosen regime of work – finishing or rough treatment; thus, producer ensures productivity under performance specification not less than 22 castings per hour while descaling after normalization, annealing, as well as oxides, slag blanket, welded areas while finishing. –
1.2 Units of machine (given for each element separately) –
1.2.1 Machine house
- Material of welded house – ST 54, thickness 16 mm
- Wear plate material in house – manganese, thickness – 16 mm
1.2.2 Bucket elevator – (2 pcs. per machine)
- Load capacity of 1 pc. – m3/h– 40
1.2.3 Shot material cleaner – (2 pcs. per machine)
- Aspiration volume of 1 pc. – m3/h 2500
- Capacity of 1 pc. – t/h– 120
1.2.4 Double magnet drum-separator –
Diameter mm– 300
1.2.5 Dosing bulk – (2 pcs. per machine)
- Volume of 1 pc. – m3 0,7
- Dosing valve pneumatics (different for under and overhead turbines) –
1.2.6 Turbines – Турбины (8 pcs. per machine )
- number piece 8
- type ABR-501
- diameter– диаметр mm– 500
- wheel rotations/min 1/min– 2600
- motor power kW– кВт 22
- abrasive capacity kg/min/each– 350
1.2.7 Conveyor-path
Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. We recommend to check the details with the seller before a purchase
| CNC type | |
| ------------------- | |
| worked hours | |
| hours under power | |
| state | good |
| At local norms | None |
| status | visible but unplugged |
| Last availability date | 09/03/2026 |
The ABRAZIV CM1500-8 is an industrial shot blasting machine manufactured in 2012, designed for descaling and surface treatment of large castings. It can accommodate work-pieces with a diameter of up to 1500 mm and a height of 2800 mm, supporting a maximum weight of 2000 kg when the distance between the axes of castings is 1650 mm. The machine's robust welded house is made of ST 54 steel with a thickness of 16 mm, and features manganese wear plates also 16 mm thick for enhanced durability.
This machine is powered by eight ABR-501 turbines, each with a diameter of 500 mm, rotating at 2600 rpm and driven by 22 kW motors, providing an abrasive capacity of 350 kg per minute per turbine. Additional electrical components include two bucket elevators (each with a load capacity of 40 m³/h and powered by 7.5 kW motors), two shot material cleaners with an aspiration volume of 2500 m³/h per unit and a capacity of 120 t/h, two double magnet drum-separators with 300 mm diameter drums, dosing bulk units with a volume of 0.7 m³ each, vibrating conveyors, sieves, dust aspiration systems, and a conveyor path.
The total electrical power demand includes 176 kW for turbines, 15 kW for bucket elevators, 1.5 kW for rotation devices, 3 kW for magnet separators, 8 kW for vibrating conveyors and sieves, 22 kW for dust aspiration, and 7.5 kW for the conveyor path. Compressed air requirements are 6 bar pressure at a flow rate of 35 m³/h.
The machine's projected productivity ranges from 18 to 25 loads per hour, depending on the cleaning duration and operational regime (finishing or rough treatment), with a guaranteed performance of at least 22 castings per hour under specified conditions.
Visually, the machine features a large, sturdy structure painted in blue and orange with yellow safety railings and access stairs for operator safety. It includes an overhead conveyor system with multiple large hooks for hanging parts, facilitating efficient handling of work-pieces. A blue operator cabin with ventilation ducts is integrated into the setup. The machine is situated in an industrial warehouse environment, showing typical signs of use such as some dirt and wear on the floor, but the structure appears intact with no visible damage. Safety and warning signs are posted on the panels. A manufacturer plate confirms the model and year, specifying a total motor power of 352 kW, air extraction capacity of 30,000 m³/h, voltage of 3x400V, control voltage of 24V AC/DC, and a total machine weight of 94,940 kg.
This comprehensive design and configuration make the ABRAZIV CM1500-8 suitable for heavy-duty shot blasting applications requiring high throughput and robust construction.
The following description has been generated using artificial intelligence based on the product information available. It is provided for guidance only and may not reflect all specifications or conditions. Please contact us if you need precise or confirmed details.
| Client type | Factory – large company |
| Active since | 2026 |
| Offers online | 1 |
| Last activity | March 3, 2026 |
Плоскошлифовъчна машина ABRAZIV CM1500-8
Rovinná bruska ABRAZIV CM1500-8
ABRAZIV CM1500-8 Planslibemaskine
ABRAZIV CM1500-8 Flachschleifmaschine
Επιπεδοτική μηχανή λείανσης ABRAZIV CM1500-8
ABRAZIV CM1500-8 shot blasting machine
Rectificadora tangencial ABRAZIV CM1500-8
Rectifieuse plane ABRAZIV CM1500-8
Ravna brusilica ABRAZIV CM1500-8
ABRAZIV CM1500-8 Sík köszörűgép
Rettificatrice tangenziale ABRAZIV CM1500-8
Plokštuminio šlifavimo staklės ABRAZIV CM1500-8
ABRAZIV CM1500-8 Vlakslijpmachine
Szlifierka do płaszczyzn ABRAZIV CM1500-8
Retificadora plana ABRAZIV CM1500-8
Mașină de rectificat plană ABRAZIV CM1500-8
ABRAZIV CM1500-8 Плоскошлифовальный станок
Ravna brusilica ABRAZIV CM1500-8
ABRAZIV CM1500-8 Planslipmaskin
Yüzey taşlama makinesi ABRAZIV CM1500-8
EN
- Languages
English (GB)