The line for the production of forest mesh AL-2500/KX, built in 2013 by KABEX P.P.H.U., produces a durable and resistant to mechanical damage mesh with a maximum length of 100 meters and a diverse cross-section of wires.

The AL 2500 KX forest mesh machine consists of:
- unwinder frame (1 pc),
- stand for wire rolls (53 pcs.),
- unwinding basket (53 pcs.),
- machine body (1 set),
- pulling drum (1 pc.),
- net winding drum (1 item),
- a guide shaft with a brake to increase the tension of the wire (1 pc.),
- tool table with capping rollers, tubes and wire guide plates (1 item),
- wire feeder with wheels feeding the appropriate length of wire to the tool table for wrapping it in the net (1 set),
- screwing mechanisms (27 sets),
- guillotines (26 sets),
- wire bending clamps (27 sets),
- a table that lays the net, performing a reciprocating movement in order to precisely arrange the rolls of the net next to each other (1 item),
- safety barriers with a sensor (2 pcs.).

The weaving of the mesh begins with feeding a certain amount of wire onto the mesh by the pulling drum, followed by the start of the feeder responsible for feeding the appropriate length of wire to the tool table of the machine in order to wrap it in the mesh. In the next stage, the guillotine simultaneously cuts the wire and bends its tip with the tip of the knife. At the same time, the wire bending fingers work together with the guillotine, which bend the other end of the cut wire section.

While the guillotine and the bending fingers move away, the curling shaft makes 8 turns in order to make the appropriate number of turns of the curl. Finally, the guillotine returns to its initial position, which restarts the entire meshing cycle from the beginning. The AL-2500/KX knotted forest mesh production machine performs a maximum of 50 such cycles per minute.

Technical data of the machine for the production of knotted mesh AL-2500/KX

- height range of the produced net: 0.3-2.5 m
- length of the net produced: 50 or 100 m
- number of wires: 29-53 pcs.
- range of wire diameters: 1.6-3 mm
- spacing of wires in the mesh: 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, 2x25 cm
- maximum forming speed: 1.5 m/min
- cutting length accuracy: ± 1 mm
- net roll winding mechanism: smooth drum with net blocking mechanism in the shaft
- net closing mechanism: wrapper, guillotine, bending claw
- cutting the net roll: manual (after winding the desired length of the net)
- power consumption: 5.5 kW
- power supply: 400V; 50 Hz
- space requirement (with unwinder): approx. 170 m2
- dimensions (length x width x height): 4500 x 2200 x 2100 mm
- machine weight AL 2500/KX: 2200 kg

Equipment for the machine for the production of forest mesh AL-2500/KX

- PLC controller: ARRAY APB-22-MRDL
- SH-300 operator panel
- geared motor (feeder): 1.5 kW, 83 rpm
- geared motor (turning): 5.5 kW, 83 rpm
- gear motor (drum): 2.2 kW, 15 rpm
- geared motor (guillotine): 4 kW, 90 rpm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Length x width x height 4500.0 × 2200.0 × 2100.0
Weight 2200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The line for the production of forest mesh AL-2500/KX, built in 2013 by KABEX P.P.H.U., produces a durable and resistant to mechanical damage mesh with a maximum length of 100 meters and a diverse cross-section of wires.

The AL 2500 KX forest mesh machine consists of:
- unwinder frame (1 pc),
- stand for wire rolls (53 pcs.),
- unwinding basket (53 pcs.),
- machine body (1 set),
- pulling drum (1 pc.),
- net winding drum (1 item),
- a guide shaft with a brake to increase the tension of the wire (1 pc.),
- tool table with capping rollers, tubes and wire guide plates (1 item),
- wire feeder with wheels feeding the appropriate length of wire to the tool table for wrapping it in the net (1 set),
- screwing mechanisms (27 sets),
- guillotines (26 sets),
- wire bending clamps (27 sets),
- a table that lays the net, performing a reciprocating movement in order to precisely arrange the rolls of the net next to each other (1 item),
- safety barriers with a sensor (2 pcs.).

The weaving of the mesh begins with feeding a certain amount of wire onto the mesh by the pulling drum, followed by the start of the feeder responsible for feeding the appropriate length of wire to the tool table of the machine in order to wrap it in the mesh. In the next stage, the guillotine simultaneously cuts the wire and bends its tip with the tip of the knife. At the same time, the wire bending fingers work together with the guillotine, which bend the other end of the cut wire section.

While the guillotine and the bending fingers move away, the curling shaft makes 8 turns in order to make the appropriate number of turns of the curl. Finally, the guillotine returns to its initial position, which restarts the entire meshing cycle from the beginning. The AL-2500/KX knotted forest mesh production machine performs a maximum of 50 such cycles per minute.

Technical data of the machine for the production of knotted mesh AL-2500/KX

- height range of the produced net: 0.3-2.5 m
- length of the net produced: 50 or 100 m
- number of wires: 29-53 pcs.
- range of wire diameters: 1.6-3 mm
- spacing of wires in the mesh: 16x5 cm, 3x10 cm, 2x15 cm, 3x20 cm, 2x25 cm
- maximum forming speed: 1.5 m/min
- cutting length accuracy: ± 1 mm
- net roll winding mechanism: smooth drum with net blocking mechanism in the shaft
- net closing mechanism: wrapper, guillotine, bending claw
- cutting the net roll: manual (after winding the desired length of the net)
- power consumption: 5.5 kW
- power supply: 400V; 50 Hz
- space requirement (with unwinder): approx. 170 m2
- dimensions (length x width x height): 4500 x 2200 x 2100 mm
- machine weight AL 2500/KX: 2200 kg

Equipment for the machine for the production of forest mesh AL-2500/KX

- PLC controller: ARRAY APB-22-MRDL
- SH-300 operator panel
- geared motor (feeder): 1.5 kW, 83 rpm
- geared motor (turning): 5.5 kW, 83 rpm
- gear motor (drum): 2.2 kW, 15 rpm
- geared motor (guillotine): 4 kW, 90 rpm

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Length x width x height 4500.0 × 2200.0 × 2100.0
Weight 2200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

KABEX AL-2500/KX Sheet metal machine