Fruit and vegetable grinder with grinding ring 25T/H

Description of the machine:
 
With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity.
 
The raw material is placed in the funnel of the mill.
There is a screw in the hopper that conveys the raw material to the grinder.
The raw material is crushed in the grinder and laterally conveyed out of the grinder.
Depending on the material to be ground, different knives and grinding rings can be used.
You can also change the grinding degree through the speed.
If necessary, it is possible to overlay the grinding with inert gas
The system can be easily opened and pulled apart for cleaning.
The mill is completely assembled and wired on a frame.
Two lip seals are installed to seal the grinder on the drive shaft.
To reduce wear, water is used between the seals for cooling and lubrication. Requires approx. 60 l / h.
Technical details of the entire system:
 
Dimensions:
 
Length about 3000 mm
Width about 1200 mm
Differential height of insertion to discharge approx. 1000 mm
Screw tube diameter 300 mm
Diameter grinding plate 300 mm
Number of knives 18 pcs. 2 types of knives
Throughput 25 tons / h depending on the product and temperature
Required connection power 80 amps
Water connection 60 l / h for lubricating water grinding plates
Electric control:
Description:
The grinder and the motor of the feed screw are supplied via frequency converters
The control is constructed with switches and a potentiometer.
The frequency converters are connected to each other to protect the grinder.
If the grinder draws too much power, the auger switches off briefly so that the grinder is not overloaded.
 
Technical design control cabinet
Control cabinet: Rittal stainless steel
Frequency converter: Danfoss
Switch potentiometer and lights: Eaton
Safety relay: mushroom
Mühle safety switch: Schmersal
Switch:
Not off at the closet
Reset button for emergency stop and safety switch from Mühle, with indicator light whether emergency stop is active
Start stop rotary switch for grinder
Potti for setting the speed of the grinder
Indicator light whether the mill is running
Start stop rotary switch for the feed screw
Potti for adjusting the speed of the feed screw
Indicator light whether the feed screw is running
The scope of delivery includes:
1 x grinding ring ‘’rough’’
1 x grinding ring ‘’fine’’
1 set of knives ‘’rough’’
1 set of knives ‘’fine’’
Operating instructions: German paper format
USB stick in German and English
The scope of delivery does not include:
Connection of the machines in the "Water, Electricity" operation.
The connection points for this are available on the machines.
All measures that are not included in the scope of delivery and which are requested will be charged at cost.
Delivery date: approx. 6-8 working weeks / after agreement

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Output 25000 kg/h
-------------------
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms yes
Status
Client type Reseller
Active since 2013
Offers online 43
Last activity March 28, 2024

Description

Fruit and vegetable grinder with grinding ring 25T/H

Description of the machine:
 
With this mill system it is possible to shred a wide variety of raw materials, adapted to the pressing system and the degree of maturity.
 
The raw material is placed in the funnel of the mill.
There is a screw in the hopper that conveys the raw material to the grinder.
The raw material is crushed in the grinder and laterally conveyed out of the grinder.
Depending on the material to be ground, different knives and grinding rings can be used.
You can also change the grinding degree through the speed.
If necessary, it is possible to overlay the grinding with inert gas
The system can be easily opened and pulled apart for cleaning.
The mill is completely assembled and wired on a frame.
Two lip seals are installed to seal the grinder on the drive shaft.
To reduce wear, water is used between the seals for cooling and lubrication. Requires approx. 60 l / h.
Technical details of the entire system:
 
Dimensions:
 
Length about 3000 mm
Width about 1200 mm
Differential height of insertion to discharge approx. 1000 mm
Screw tube diameter 300 mm
Diameter grinding plate 300 mm
Number of knives 18 pcs. 2 types of knives
Throughput 25 tons / h depending on the product and temperature
Required connection power 80 amps
Water connection 60 l / h for lubricating water grinding plates
Electric control:
Description:
The grinder and the motor of the feed screw are supplied via frequency converters
The control is constructed with switches and a potentiometer.
The frequency converters are connected to each other to protect the grinder.
If the grinder draws too much power, the auger switches off briefly so that the grinder is not overloaded.
 
Technical design control cabinet
Control cabinet: Rittal stainless steel
Frequency converter: Danfoss
Switch potentiometer and lights: Eaton
Safety relay: mushroom
Mühle safety switch: Schmersal
Switch:
Not off at the closet
Reset button for emergency stop and safety switch from Mühle, with indicator light whether emergency stop is active
Start stop rotary switch for grinder
Potti for setting the speed of the grinder
Indicator light whether the mill is running
Start stop rotary switch for the feed screw
Potti for adjusting the speed of the feed screw
Indicator light whether the feed screw is running
The scope of delivery includes:
1 x grinding ring ‘’rough’’
1 x grinding ring ‘’fine’’
1 set of knives ‘’rough’’
1 set of knives ‘’fine’’
Operating instructions: German paper format
USB stick in German and English
The scope of delivery does not include:
Connection of the machines in the "Water, Electricity" operation.
The connection points for this are available on the machines.
All measures that are not included in the scope of delivery and which are requested will be charged at cost.
Delivery date: approx. 6-8 working weeks / after agreement

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Output 25000 kg/h
-------------------
Worked hours 0 hours
Hours under power 0 hours
State new
At local norms yes
Status

About this seller

Client type Reseller
Active since 2013
Offers online 43
Last activity March 28, 2024

Here is a selection of similar machines

Fruit and vegetable grinder with grinding ring 25T/H