Sorry, this offer is no longer available on Exapro

WEEKE PROFI ABS 110 Wood CNC machining centre

Here is a selection of similar machines

Machine with lay-up station and working station
Working station machining from top and bottom:
vertical drilling from the top
Vertical driling from the bottom
Setting and pressing the hardware (2 types) from the bottom
Setting and pressing the drawer adaptors from the bottom
Shaping handles

After the laying of the panel by the operator, the panel is automaticaly clamped in X-direction. The panel can then automaticaly be measured in the X direction and the size can be compared with the programm installed.

Panels should be square, max. edge profile 3 mm deep
Panel sizes:
For door fronts:
Height min. 190 mm/max. 2400 mm
Width min. 190 mm/max 700 mm
Thickness min. 16 mm/ max 25 mm
For drawer fronts:
Width min. 190 mm/max 1200 mm
Height min. 100 mm/max. 750 mm
Thickness min. 16 mm/ max 25 mm
Capacity up to 450 parts per shift

Hard- and Software:
Powercontrol System with PC
Woodwop Programming system

Operations:
1 x Top drilling unit, 3 spindles 32 mm centers, 1,5 kW
2 x router with ETP quickrelease system, 6 kW, 6000-18000 rpm
1 x bottom drilling unit with 7 spindles 32 mm centers
Free space for puffer inserting system
1 x bottom drilling unit for kitchen door hardware
1 x bottom inserting and pressing unit for kitchen hardware 107°/170°, 2 hardware hopper feeds
1 x inserting and pressing unit for drawer adaptors in 0° or 90° position including hopper feed

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

CNC type Powercontrol System with PC Woodwop Programming system
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

Machine with lay-up station and working station
Working station machining from top and bottom:
vertical drilling from the top
Vertical driling from the bottom
Setting and pressing the hardware (2 types) from the bottom
Setting and pressing the drawer adaptors from the bottom
Shaping handles

After the laying of the panel by the operator, the panel is automaticaly clamped in X-direction. The panel can then automaticaly be measured in the X direction and the size can be compared with the programm installed.

Panels should be square, max. edge profile 3 mm deep
Panel sizes:
For door fronts:
Height min. 190 mm/max. 2400 mm
Width min. 190 mm/max 700 mm
Thickness min. 16 mm/ max 25 mm
For drawer fronts:
Width min. 190 mm/max 1200 mm
Height min. 100 mm/max. 750 mm
Thickness min. 16 mm/ max 25 mm
Capacity up to 450 parts per shift

Hard- and Software:
Powercontrol System with PC
Woodwop Programming system

Operations:
1 x Top drilling unit, 3 spindles 32 mm centers, 1,5 kW
2 x router with ETP quickrelease system, 6 kW, 6000-18000 rpm
1 x bottom drilling unit with 7 spindles 32 mm centers
Free space for puffer inserting system
1 x bottom drilling unit for kitchen door hardware
1 x bottom inserting and pressing unit for kitchen hardware 107°/170°, 2 hardware hopper feeds
1 x inserting and pressing unit for drawer adaptors in 0° or 90° position including hopper feed

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

CNC type Powercontrol System with PC Woodwop Programming system
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024