Sorry, this offer is no longer available on Exapro

WADKIN 220 XJS Planing machine

Here is a selection of similar machines

Hydraulic accelerator in order to feed the workpiece one after the other
Linear profiling machine Wadkin with 9 tools, doing the long side of the panels
50 m/min feed speed
Ceramic treated machinenbed with air nozzles in order to have a slip-free pass
Cardanshaft Feedworks with hydraulic unit 30 HP
All PU-feedrollers are independantly pneumatically loaded
Elektronic-digital read-out for all spindle adjustments
Special designed pressure shoes towards the vertical spindles
Sound enclosure with pneumatic lifting doors all over the machine
Equipment:
2 m. infeed table
Bottom horizontal spindle for the scoring of both sides of the panel, 15 HP
Right and left a rough profiling spindle, each 80 mm diameter and each10 HP
Right and left a finishing profiling spindle for the lower side of the profile, each 10 HP
Right and left a finishing profiling spindle for the upper side of the profile, each 10 HP
Right and left a chamfer milling spindle each 10 HP
2 Top and bottom brushes cleaning the upper and lower panel surface
90° Angular transfer to the left with an intermediate magazine in 2 levels for max. Workpieces of 1220 x 215 mm (Adjustable in width 195 - 215 mm), capacity of 42 pcs a minute

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Feeding table length 2000 mm
Feed speed 50 m/min
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Wadkin 220 XJS
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

Hydraulic accelerator in order to feed the workpiece one after the other
Linear profiling machine Wadkin with 9 tools, doing the long side of the panels
50 m/min feed speed
Ceramic treated machinenbed with air nozzles in order to have a slip-free pass
Cardanshaft Feedworks with hydraulic unit 30 HP
All PU-feedrollers are independantly pneumatically loaded
Elektronic-digital read-out for all spindle adjustments
Special designed pressure shoes towards the vertical spindles
Sound enclosure with pneumatic lifting doors all over the machine
Equipment:
2 m. infeed table
Bottom horizontal spindle for the scoring of both sides of the panel, 15 HP
Right and left a rough profiling spindle, each 80 mm diameter and each10 HP
Right and left a finishing profiling spindle for the lower side of the profile, each 10 HP
Right and left a finishing profiling spindle for the upper side of the profile, each 10 HP
Right and left a chamfer milling spindle each 10 HP
2 Top and bottom brushes cleaning the upper and lower panel surface
90° Angular transfer to the left with an intermediate magazine in 2 levels for max. Workpieces of 1220 x 215 mm (Adjustable in width 195 - 215 mm), capacity of 42 pcs a minute

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Feeding table length 2000 mm
Feed speed 50 m/min
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024