The TORNOS MICRO-8 CNC automatic lathe, manufactured in 2008 in Switzerland, was created for ultra-precise machining of details with a maximum diameter of 10 mm. The machine, characterized by wide machining capabilities, a stable structure made of the highest quality cast iron and small dimensions, is perfect for any production plant, even during the most demanding challenges.

The TORNOS CNC turning center is equipped with a main spindle and a counter-spindle with integrated thermal regulation, an adapter sleeve and a bearing with ceramic balls. Both headstocks, running on guides with increased stiffness, are powered by reliable FANUC engines, which provide the necessary power for versatile use of all cutting tools. During production, cooling and lubricating oil constantly flows through the machine structure to maintain a constant temperature level.

All the necessary tools are placed in a 20-position linear magazine, built on a cross slide controlled in two axes. To maximize the efficiency of the process, the tools were arranged in the warehouse in such a way as to enable simultaneous machining on the main spindle and the counter-spindle. Thanks to this solution, the MICRO-8 double-spindle CNC lathe can be used, among others, for: for simultaneous turning and drilling from the face, or simultaneous roughing and finishing turning.

The MICRO 8 longitudinal automatic lathe is offered with extensive equipment, including: ROBOBAR SBF-210 bar feeder, DONALDSON TORIT DCE multi-chamber oil mist extraction system and intuitive FANUC Series 32i-MODEL A CNC controller. The total weight of the machine is approximately 2000 kg.

Technical specifications of the TORNOS MICRO-8 turning center

General information
- number of axes: 5 (X1, X2, Y1, Z1, Z4)
- number of axes working simultaneously: 4
- accelerated feeds in the X, Y, Z axis: 40 m/min
- coolant pump capacity: 120 l/min
- power consumption: 8 kVA
- maximum ambient temperature: 35°C
- dimensions (length x width x height): 1670 x 870 x 1650 mm
- power supply: 3x 400 V; 50 Hz
- bar feeder weight: approx. 540 kg
- machine weight: approx. 2000 kg

Main spindle
- rotational speed range: 0-15000 rpm
- maximum drilling diameter: 6 mm
- maximum threading diameter: M6
- maximum rod diameter: 10 mm (8 mm without rod preparation)
- pull-in collet type: W15-80-0003
- integrated FANUC engine
- power: 2.2/3.7 kW
- thermal stabilization

Counter spindle
- rotational speed range: 0-15000 rpm
- maximum drilling diameter: 6 mm
- maximum threading diameter: M6
- maximum rod diameter: 10 mm
- clamping sleeve type: F13-76-00357
- integrated FANUC engine
- power: 2.2/3.7 kW
- thermal stabilization

Linear tool system
- total number of tools: 20
- maximum number of tools for turning external surfaces: 10
- maximum number of turning/drilling tools for machining from the face: 4
- maximum number of turning/drilling tools for reverse machining: 4
- maximum number of cross tools: 3
- rotational speed of driven transverse rotary tools: 10,000 rpm
- rotational speed of rotary tools: 5-80000 rpm
- drilling diameter: 3 mm
- cross-section of the shank of tools for external turning: 12x12 mm
- power of the rotating tool drive motor: 0.4 kW

Equipment for the TORNOS MICRO CNC lathe

- CNC controller: FANUC Series 32i-MODEL A
- automatic bar feeder: ROBOBAR SBF-210
rod diameter range: 2-10 mm
maximum bar length: 3200 mm
feeder capacity: 20 pcs.
closed-circuit lubrication of bar guides
- multi-chamber oil mist extraction system: DONALDSON TORIT DCE
- belt conveyor with detail holder
- workpiece ejection system with rinsing and filter
- MINI-DETECTOR type damage control sensor for axial tools
- low-set spindle handle with a socket with a diameter of 25 mm
- holder plate for 5 tools with a cross-section of 12x12mm
- tool post for 2 rotary tools with a cross-section of 12x12 mm
- holder with 3 holes with a diameter of 16 mm
- double ER11 ø 16 mm collet holder
- pipes supplying coolant to the tool holder with 3 positions
- constant feed/rotational speed function G96
- pneumatic separator of processed parts with a tank for finished elements
- coolant pump
- electrical cabinet integrated with the machine housing
- warning lamp
- work lighting
- central lubrication
- compressed air unit

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max. Ø 6 mm
Nbr of spindles 2
Max. length 3200 mm
Type CNC
Type of CNC FANUC Series 32i-MODEL A
Nbr of axes 5
Spindle speed 15000 rpm
-------------------
Length x width x height 1670.0 × 870.0 × 1650.0
Weight 2000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Description

The TORNOS MICRO-8 CNC automatic lathe, manufactured in 2008 in Switzerland, was created for ultra-precise machining of details with a maximum diameter of 10 mm. The machine, characterized by wide machining capabilities, a stable structure made of the highest quality cast iron and small dimensions, is perfect for any production plant, even during the most demanding challenges.

The TORNOS CNC turning center is equipped with a main spindle and a counter-spindle with integrated thermal regulation, an adapter sleeve and a bearing with ceramic balls. Both headstocks, running on guides with increased stiffness, are powered by reliable FANUC engines, which provide the necessary power for versatile use of all cutting tools. During production, cooling and lubricating oil constantly flows through the machine structure to maintain a constant temperature level.

All the necessary tools are placed in a 20-position linear magazine, built on a cross slide controlled in two axes. To maximize the efficiency of the process, the tools were arranged in the warehouse in such a way as to enable simultaneous machining on the main spindle and the counter-spindle. Thanks to this solution, the MICRO-8 double-spindle CNC lathe can be used, among others, for: for simultaneous turning and drilling from the face, or simultaneous roughing and finishing turning.

The MICRO 8 longitudinal automatic lathe is offered with extensive equipment, including: ROBOBAR SBF-210 bar feeder, DONALDSON TORIT DCE multi-chamber oil mist extraction system and intuitive FANUC Series 32i-MODEL A CNC controller. The total weight of the machine is approximately 2000 kg.

Technical specifications of the TORNOS MICRO-8 turning center

General information
- number of axes: 5 (X1, X2, Y1, Z1, Z4)
- number of axes working simultaneously: 4
- accelerated feeds in the X, Y, Z axis: 40 m/min
- coolant pump capacity: 120 l/min
- power consumption: 8 kVA
- maximum ambient temperature: 35°C
- dimensions (length x width x height): 1670 x 870 x 1650 mm
- power supply: 3x 400 V; 50 Hz
- bar feeder weight: approx. 540 kg
- machine weight: approx. 2000 kg

Main spindle
- rotational speed range: 0-15000 rpm
- maximum drilling diameter: 6 mm
- maximum threading diameter: M6
- maximum rod diameter: 10 mm (8 mm without rod preparation)
- pull-in collet type: W15-80-0003
- integrated FANUC engine
- power: 2.2/3.7 kW
- thermal stabilization

Counter spindle
- rotational speed range: 0-15000 rpm
- maximum drilling diameter: 6 mm
- maximum threading diameter: M6
- maximum rod diameter: 10 mm
- clamping sleeve type: F13-76-00357
- integrated FANUC engine
- power: 2.2/3.7 kW
- thermal stabilization

Linear tool system
- total number of tools: 20
- maximum number of tools for turning external surfaces: 10
- maximum number of turning/drilling tools for machining from the face: 4
- maximum number of turning/drilling tools for reverse machining: 4
- maximum number of cross tools: 3
- rotational speed of driven transverse rotary tools: 10,000 rpm
- rotational speed of rotary tools: 5-80000 rpm
- drilling diameter: 3 mm
- cross-section of the shank of tools for external turning: 12x12 mm
- power of the rotating tool drive motor: 0.4 kW

Equipment for the TORNOS MICRO CNC lathe

- CNC controller: FANUC Series 32i-MODEL A
- automatic bar feeder: ROBOBAR SBF-210
rod diameter range: 2-10 mm
maximum bar length: 3200 mm
feeder capacity: 20 pcs.
closed-circuit lubrication of bar guides
- multi-chamber oil mist extraction system: DONALDSON TORIT DCE
- belt conveyor with detail holder
- workpiece ejection system with rinsing and filter
- MINI-DETECTOR type damage control sensor for axial tools
- low-set spindle handle with a socket with a diameter of 25 mm
- holder plate for 5 tools with a cross-section of 12x12mm
- tool post for 2 rotary tools with a cross-section of 12x12 mm
- holder with 3 holes with a diameter of 16 mm
- double ER11 ø 16 mm collet holder
- pipes supplying coolant to the tool holder with 3 positions
- constant feed/rotational speed function G96
- pneumatic separator of processed parts with a tank for finished elements
- coolant pump
- electrical cabinet integrated with the machine housing
- warning lamp
- work lighting
- central lubrication
- compressed air unit

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max. Ø 6 mm
Nbr of spindles 2
Max. length 3200 mm
Type CNC
Type of CNC FANUC Series 32i-MODEL A
Nbr of axes 5
Spindle speed 15000 rpm
-------------------
Length x width x height 1670.0 × 870.0 × 1650.0
Weight 2000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 29, 2024

Here is a selection of similar machines

Tornos MICRO-8 Multispindle automatic lathe