This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.

Machine width: 2560 mm
Machine depth: 1600 mm
Machine height: 1650 mm
Machine weight: 3500 kg
CNC: FANUC Oi-TC
Spindle speed range: 60-6000 rpm
X-Axis Movement: 175
Z-Axis Movement: 330
Number of tool slots: 24
Bar feeder: LNS ECO LOAD (2007)

Swing over bed: 510 mm
Swing over carriage: 290 mm
Max turning diameter: 320 mm
Max turning length: 322 mm
X-axis travel: 175 mm // z-axis travel: 330 mm
Spindle speeds: 60-6000 rpm
Turret stations: 24
The machine is in good condition, but there is an issue with the coolant pump.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Turning length 322 mm
Turning Ø 320 mm
Ø above the bed 510 mm
Ø above transversing slide 290 mm
Length between centers 23 mm
Type of CNC FANUC Oi-TC
X-axis 175 mm
Z-axis 330 mm
Max workpiece weight 130 kg
Spindle taper
Spindle bore 51 mm
Number of turrets 1
Number of tools on turret 24
Number of rotating tools 12
Turning speed 6000 rpm
Spindle motor power 15 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 2560.0 × 1600.0 × 1650.0
Weight 3500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet Doosan Lynx 220LM
Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Description

This DOOSAN LYNX 220LMA Lathe was manufactured in 2007 in South Korea. It is equipped with a FANUC Oi-TC control. The machine has 2 axes (X-Axis Travel: 175 mm, Z-Axis Travel: 330 mm), a max. turning diameter of 320 mm and a max. turning length of 322 mm. It comes with 24 turret stations and a spindle speed range of 60-6000 rpm. Swing over bed is 510 mm and swing over carriage is 290 mm. This lathe is in good condition, only the coolant pump has an issue which requires a technical review.

Machine width: 2560 mm
Machine depth: 1600 mm
Machine height: 1650 mm
Machine weight: 3500 kg
CNC: FANUC Oi-TC
Spindle speed range: 60-6000 rpm
X-Axis Movement: 175
Z-Axis Movement: 330
Number of tool slots: 24
Bar feeder: LNS ECO LOAD (2007)

Swing over bed: 510 mm
Swing over carriage: 290 mm
Max turning diameter: 320 mm
Max turning length: 322 mm
X-axis travel: 175 mm // z-axis travel: 330 mm
Spindle speeds: 60-6000 rpm
Turret stations: 24
The machine is in good condition, but there is an issue with the coolant pump.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Turning length 322 mm
Turning Ø 320 mm
Ø above the bed 510 mm
Ø above transversing slide 290 mm
Length between centers 23 mm
Type of CNC FANUC Oi-TC
X-axis 175 mm
Z-axis 330 mm
Max workpiece weight 130 kg
Spindle taper
Spindle bore 51 mm
Number of turrets 1
Number of tools on turret 24
Number of rotating tools 12
Turning speed 6000 rpm
Spindle motor power 15 kW
Tailstock no
Bar feeder yes
-------------------
Length x width x height 2560.0 × 1600.0 × 1650.0
Weight 3500 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 941
Last activity March 28, 2024

Here is a selection of similar machines

DOOSAN LYNX 220LMA Lathe