The COMAU 1GXL TWIN horizontal machining center was built by the Italian company Comau S.p.A. in 2003. The machine works well for machining the lower cylinder head. The TWIN module consists of two machining centers mounted opposite each other with 3 axes with numerical control. The installed portal enables automatic loading and unloading of the machine. Each machining center has a movable head mounted on a housing, used for milling, drilling or smoothing.

The spindle head is located on the horizontal axis to which the electrospindle rotating at a speed of 16,000 rpm is mounted. It is equipped with an automatic system for locking / unlocking tools that are picked up / put away from a rotary tool magazine with space for 23 tools. Each tool can weigh a maximum of 4 kg, a length of 270 mm and a diameter of 170 mm.

At the front of each COMAU 1GXL TWIN milling machine module, a rotary table is mounted, with a device for clamping details during machining. Both rotary tables are mounted on one central housing. Each module is equipped with a number of power installations, such as: hydraulic system, TRABON lubrication system, air-oil lubrication system, pneumatic system and cooling system. The movement of the rotary table creates the B axis of the machining center.

The milling center has a SIEMENS Sinumerik 840D numerical control, which allows it to work in the X / Y / Z axes with maximum feeds of 630 mm each. The total weight of the milling machine is 29,200 kg.

COMAU 1GXL TWIN milling machine specification
CNC control: SIEMENS Sinumerik 840D
feeds in the X / Y / Z axes: 630/630/630 mm
accelerated feeds in the X / Y / Z axes: 10 m / sec2
X / Y / Z axis working speed: 1/1 / 0.67 m / s
cycle time: 140.4 sec.
production: 25.6 pcs / hour
spindle speed: 16,000 rpm
tool holder: HSK 63
tool magazine capacity: 23 tools
maximum diameter of tools: 170 mm
maximum tool length: 270 mm
maximum weight of tools: 4 kg
maximum power consumption: 1370 A.
maximum installed power: 720 kW
power supply: 380 V +/- 10% 50 Hz
cooling capacity of the electro-spindle cooling system: 2800 W
dimensions (L x W x H): 6100 x 2480 x 2350 mm
milling machine weight: 29,200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The COMAU 1GXL TWIN horizontal machining center was built by the Italian company Comau S.p.A. in 2003. The machine works well for machining the lower cylinder head. The TWIN module consists of two machining centers mounted opposite each other with 3 axes with numerical control. The installed portal enables automatic loading and unloading of the machine. Each machining center has a movable head mounted on a housing, used for milling, drilling or smoothing.

The spindle head is located on the horizontal axis to which the electrospindle rotating at a speed of 16,000 rpm is mounted. It is equipped with an automatic system for locking / unlocking tools that are picked up / put away from a rotary tool magazine with space for 23 tools. Each tool can weigh a maximum of 4 kg, a length of 270 mm and a diameter of 170 mm.

At the front of each COMAU 1GXL TWIN milling machine module, a rotary table is mounted, with a device for clamping details during machining. Both rotary tables are mounted on one central housing. Each module is equipped with a number of power installations, such as: hydraulic system, TRABON lubrication system, air-oil lubrication system, pneumatic system and cooling system. The movement of the rotary table creates the B axis of the machining center.

The milling center has a SIEMENS Sinumerik 840D numerical control, which allows it to work in the X / Y / Z axes with maximum feeds of 630 mm each. The total weight of the milling machine is 29,200 kg.

COMAU 1GXL TWIN milling machine specification
CNC control: SIEMENS Sinumerik 840D
feeds in the X / Y / Z axes: 630/630/630 mm
accelerated feeds in the X / Y / Z axes: 10 m / sec2
X / Y / Z axis working speed: 1/1 / 0.67 m / s
cycle time: 140.4 sec.
production: 25.6 pcs / hour
spindle speed: 16,000 rpm
tool holder: HSK 63
tool magazine capacity: 23 tools
maximum diameter of tools: 170 mm
maximum tool length: 270 mm
maximum weight of tools: 4 kg
maximum power consumption: 1370 A.
maximum installed power: 720 kW
power supply: 380 V +/- 10% 50 Hz
cooling capacity of the electro-spindle cooling system: 2800 W
dimensions (L x W x H): 6100 x 2480 x 2350 mm
milling machine weight: 29,200 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Axis X 630 mm
Axis Y 630 mm
Axis Z 630 mm
Rotary table (4th axis) no
CNC SIEMENS Sinumerik 840D
Number of tool pockets 23
Spindle taper HSK 63
Max. spindle speed 16000 rpm
-------------------
Length x width x height 6100.0 × 2480.0 × 2350.0
Weight 29200 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

Comau 1GXL TWIN Machining center - horizontal