Sorry, this offer is no longer available on Exapro

Used INTOREX TXA 1300 automatic electronic lathe

Here is a selection of similar machines

Fully automatic electronic lathe, fitted with two hydraulic copiers and two tools-holder sets. The copying saddle is controlled by a servo motor which allows to adjust the advance speed from 0 to 40 m/minute and which is moved over a linear ball-bearing assembly guide way, tempered and machined.

The headstock drive is equipped with a motor of 10 HP controlled by a PLC with an inverter which allows to always work at the desired speed rotation and halt the head at the end of the cycle

The machine is fitted with PLC with programmable logic control and an automatic programming system for the creation, modification and storing in memory of some work cycles according to the profile to be mechanized.

The automatic cycle allows to load squares of140x140 meanwhile in semi-automatic the machine can turn up to 240mm.

The CX-1600 has the same technical specifications as the TXA-1300 but within the chance to turn up to 1600mm length in automatic cycle and 1900 mm length in semi-automatic cycle.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Max turning length 1300 mm
Max turning Ø 240 mm
Operation mode Automatic
Distance between the centres 1300 mm
-------------------
Worked hours 200 hours
Hours under power
State like new
At local norms yes
Status
Client type Reseller
Active since 2013
Offers online 0
Last activity April 17, 2019

Description

Fully automatic electronic lathe, fitted with two hydraulic copiers and two tools-holder sets. The copying saddle is controlled by a servo motor which allows to adjust the advance speed from 0 to 40 m/minute and which is moved over a linear ball-bearing assembly guide way, tempered and machined.

The headstock drive is equipped with a motor of 10 HP controlled by a PLC with an inverter which allows to always work at the desired speed rotation and halt the head at the end of the cycle

The machine is fitted with PLC with programmable logic control and an automatic programming system for the creation, modification and storing in memory of some work cycles according to the profile to be mechanized.

The automatic cycle allows to load squares of140x140 meanwhile in semi-automatic the machine can turn up to 240mm.

The CX-1600 has the same technical specifications as the TXA-1300 but within the chance to turn up to 1600mm length in automatic cycle and 1900 mm length in semi-automatic cycle.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Max turning length 1300 mm
Max turning Ø 240 mm
Operation mode Automatic
Distance between the centres 1300 mm
-------------------
Worked hours 200 hours
Hours under power
State like new
At local norms yes
Status

About this seller

Client type Reseller
Active since 2013
Offers online 0
Last activity April 17, 2019