The FINN-POWER A5-25 FB punching machine was manufactured in 1999 in Finland. Characterized by high reliability, the machine is designed for precise punching of holes in sheets with a maximum thickness of 8 mm. The combination of a high pressure force of 23 tons and a large-area brush table guarantee excellent machining results without any scratches or marks on the surface of the detail. The sheet metal punching machine is controlled by a FANUC CNC controller with the possibility of programming the punching parameters and full control over the operation of the machine. The total weight of the FINN-POWER A5-25FB turret press is 12,000 kg.

Technical parameters of the FINN-POWER A5-25 FB hydraulic punching machine

- CNC controller: FANUC
- pressing force: 23 t (230 kN)
- feeds in the X / Y axes: 2500/1250 mm
- maximum detail thickness: 8 mm
- brush table
- maximum hydraulic pressure: 300 bar
- power supply: 3x 400V; 50 Hz
- dimensions (length x width x height): 6000 x 6000 x 2000 mm
- machine weight A5-25 FB: 12000 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 23 T
Metal length 2500 mm
CNC type Fanuc
Metal width 1250 mm
Max steel thickness 8 mm
-------------------
Length x width x height 6000.0 × 6000.0 × 2000.0
Weight 12000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The FINN-POWER A5-25 FB punching machine was manufactured in 1999 in Finland. Characterized by high reliability, the machine is designed for precise punching of holes in sheets with a maximum thickness of 8 mm. The combination of a high pressure force of 23 tons and a large-area brush table guarantee excellent machining results without any scratches or marks on the surface of the detail. The sheet metal punching machine is controlled by a FANUC CNC controller with the possibility of programming the punching parameters and full control over the operation of the machine. The total weight of the FINN-POWER A5-25FB turret press is 12,000 kg.

Technical parameters of the FINN-POWER A5-25 FB hydraulic punching machine

- CNC controller: FANUC
- pressing force: 23 t (230 kN)
- feeds in the X / Y axes: 2500/1250 mm
- maximum detail thickness: 8 mm
- brush table
- maximum hydraulic pressure: 300 bar
- power supply: 3x 400V; 50 Hz
- dimensions (length x width x height): 6000 x 6000 x 2000 mm
- machine weight A5-25 FB: 12000 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 23 T
Metal length 2500 mm
CNC type Fanuc
Metal width 1250 mm
Max steel thickness 8 mm
-------------------
Length x width x height 6000.0 × 6000.0 × 2000.0
Weight 12000 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

Finn POwer A5-25 FB CNC punching machine