Sorry, this offer is no longer available on Exapro

Used Brandt KD - 97C Edgebander

Here is a selection of similar machines

- After the technical review
- Very good condition

SPECIFICATIONS;

- Make Brandt
- Type KD 79
- Year of production 1999

- Minimum width of the workpiece. 65 mm
- Minimum material length 160 mm
- Min thickness of 8 mm - Max thickness of 55 mm
- Min - Max thickness of the veneer 0.4-12 mm

- Feed m / min 11 + 16 m / min

- Large magazine hopper glue 6 liters
- Warm-up time of about 20 min
- The power unit heating the adhesive 5 kw
- Fixed magazine Edgeband to 12 mm

- Saw cutting saw front and rear 2 x 0.75 kW 12,000 U / min, 200 Hz

- Cutter flat and radius of the upper and lower edges 2 x 0.7 kW, 12,000 U / min, 200 Hz
- Cutter top - bottom profile R2 2 x 0.55 kw, 12,000 U / min

- Units zaoblajace corners szt.2 power of 2 x 0.4 KW turnover 12000/min
- The diameter of the tool (cutter) 70 x 18.5 x 16 mm R = 2

- Scraper radial top-down
- Polishing up / down 2 x 0.90 kW 2750 U / min. 50 Hz
- Zaoblanie
- Measurements tools - polishing fi 120 x 18 mm
- Centralized lubrication mechanisms transponder

- Total power 7.43 kW, 19 A
- Dust port Ø 120 mm
- Working pressure of 8 bar

Dimensions of the machine

- Length 6750 mm
- Width 1300 mm
- Height 2000 mm
- Weight 2700 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Feed advance 16 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Length x width x height 6750.0 × 1300.0 × 2000.0
Weight 2700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2015
Offers online 113
Last activity March 27, 2024

Description

- After the technical review
- Very good condition

SPECIFICATIONS;

- Make Brandt
- Type KD 79
- Year of production 1999

- Minimum width of the workpiece. 65 mm
- Minimum material length 160 mm
- Min thickness of 8 mm - Max thickness of 55 mm
- Min - Max thickness of the veneer 0.4-12 mm

- Feed m / min 11 + 16 m / min

- Large magazine hopper glue 6 liters
- Warm-up time of about 20 min
- The power unit heating the adhesive 5 kw
- Fixed magazine Edgeband to 12 mm

- Saw cutting saw front and rear 2 x 0.75 kW 12,000 U / min, 200 Hz

- Cutter flat and radius of the upper and lower edges 2 x 0.7 kW, 12,000 U / min, 200 Hz
- Cutter top - bottom profile R2 2 x 0.55 kw, 12,000 U / min

- Units zaoblajace corners szt.2 power of 2 x 0.4 KW turnover 12000/min
- The diameter of the tool (cutter) 70 x 18.5 x 16 mm R = 2

- Scraper radial top-down
- Polishing up / down 2 x 0.90 kW 2750 U / min. 50 Hz
- Zaoblanie
- Measurements tools - polishing fi 120 x 18 mm
- Centralized lubrication mechanisms transponder

- Total power 7.43 kW, 19 A
- Dust port Ø 120 mm
- Working pressure of 8 bar

Dimensions of the machine

- Length 6750 mm
- Width 1300 mm
- Height 2000 mm
- Weight 2700 kg

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Feed advance 16 m/min
Sound-proof cabin Yes
Glue tank Yes
-------------------
Length x width x height 6750.0 × 1300.0 × 2000.0
Weight 2700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2015
Offers online 113
Last activity March 27, 2024