Sorry, this offer is no longer available on Exapro

Used Biesse Rover 35L Wood CNC machining centre

Here is a selection of similar machines

Scope of work:
X axis - 4.500 mm
The Y axis - 1.650 mm

table:
8 ATS system console at any console "
     Two buffers (1 x rear, 1 x front)
     3 rotary nozzle
     digital display to set the console and suction cups
     pneumatically controlled lifting rail
The tape transport chips
Vacuum pump 100 m3 / h
Ability to work on 4 fields

Units:
1 7.5 kW main spindle, HSK 63 F
   with an additional C-axis
1 7.5 kW main spindle, HSK 63 F

Automatic tool changer 21 local (for tools and adapters)

Aggregate chuck with 43 spindles:
12 pcs. Of vertical axis X
17 pcs. Vertical Y-axis
5 + 5 pcs. Horizontal X-axis
2 + 2 pcs. Horizontal Y axis

Saw groove in the X-axis

Control software NC 1000 NC HOPS 4.2 and

Other facilities:
* Protective fence at the back and sides of the machine, the door
* Protective mats front of the machine

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X stroke 4500 mm
Y stroke 1650 mm
Vacuum pump 100 m³/h
CNC type NC HOPS 4.2 i
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2011
Offers online 0
Last activity June 18, 2023

Description

Scope of work:
X axis - 4.500 mm
The Y axis - 1.650 mm

table:
8 ATS system console at any console "
     Two buffers (1 x rear, 1 x front)
     3 rotary nozzle
     digital display to set the console and suction cups
     pneumatically controlled lifting rail
The tape transport chips
Vacuum pump 100 m3 / h
Ability to work on 4 fields

Units:
1 7.5 kW main spindle, HSK 63 F
   with an additional C-axis
1 7.5 kW main spindle, HSK 63 F

Automatic tool changer 21 local (for tools and adapters)

Aggregate chuck with 43 spindles:
12 pcs. Of vertical axis X
17 pcs. Vertical Y-axis
5 + 5 pcs. Horizontal X-axis
2 + 2 pcs. Horizontal Y axis

Saw groove in the X-axis

Control software NC 1000 NC HOPS 4.2 and

Other facilities:
* Protective fence at the back and sides of the machine, the door
* Protective mats front of the machine

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X stroke 4500 mm
Y stroke 1650 mm
Vacuum pump 100 m³/h
CNC type NC HOPS 4.2 i
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2011
Offers online 0
Last activity June 18, 2023