Sorry, this offer is no longer available on Exapro

SCM TECH Z27 Wood CNC machining centre

Here is a selection of similar machines

WORKPLACE numerical control SCM MOD. TECH Z27 opportunity to FRESADOS, cuts, recesses, drills, ETC ...

Base and structure of the machine made of welded steel bars and stabilized to ensure maximum strength and constant performance over time.
The axis movements are ralizados by the crossbar holder work units to move longitudinally relative to the table, performs the movement of the X axis
In the same bar they are orthogonally mounted a pair of cars that carried the movements of the axes "Y" and "Z". This machine configuration is especially appreciated by the small size occupied in relation to labor camps.

The movements of the axis "X" axis the bar "and" are made using standard rotary screw and screw preloaded recirculating ball ;: fixed solution that ensures perfecfto axis positioning even at high travel speeds and also avoiding dangerous vibrations resulting in premature wear of the screw.

The movement of the axis "Z" is performed by rotating screw with recirculating ball screw and preloaded fixed pattern and is supported by a pneumatic piston to balance the weight of the moving parts; is provided along with improvised frenjo if a power failure.

Sliding of the carriages is effected inserted in interchangeable guides hardened and rectified by recirculating roller bearings preloaded with four rings contato; these are provided for double oil seal to ensure the necessary protection against dust and debris machining.

The axis movement is powered by alternating current servo type in "Brushless" controlled analog drives.
- Worktable dimensions 2,650 x 1,240 mm
- Race Z axis 200 mm
- Area of axis and vertical bores 1018 mm
- Area of axis milling and 180 mm
- Step board 180 mm
- Maximum thickness of the board 100 mm
- Z axis stroke 200 mm
- Porta-bits vertical No. 15
- Porta-horizontal drills No. 2 + 2 in X 1 + 1 grooving saw in Y
- Machine weight (including control cabinet) 3000 kg
- Vector speed axes (X-Y) 54 mm
- Z axis linear speed 11.5 m / min
- Rotation holder drills 4,000 g / min-rpm
- Engine rotation holder bits 2.2 (3) KW (Hp)
- Engine disk Strawberry 2.2 (3) KW (Hp)
- Speed of the milling cutter 6,000 m / min
- Power of the working units 6,6-7,5-9 (9-10-12) KW (HP)
- Max speed of rotation of the working units (6.6 to 7.5 KW) 24,000 g / min-rpm
- Mx rotation speed of the working units (KW 9) 18,000 g / min-rpm
- Power for horizontal milling machining unit 3 KW - (4) (HP)
- Operator speed horizontal milling group to 15,000 g / min-rpm
- Installed power (depending on the installed groups) 7.5 kw
- Compressed air pressure 6/7 atm
- Compressed air consumption 150 Nl / cycle
- Vacuum pump m3 / hour - 40 hour (100-250 opt)
- Diameter suction hood without the collector 160 + 200 + 200 mm
- Diameter suction hood with 300 mm collector
- Control Office PC
MACHINE WITH DOCUMENTATION AND REGULATIONS CE

- CHARGER 8 REAR TOOLS
- WORK TABLE WITH 6 BARS WITH EMPTY INTERIOR
- 4 collators
- 4 golf WORK
- REMOTE CONTROL

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

X stroke 3050 mm
Y stroke 1300 mm
Z stroke 180 mm
Axis nbr 3
Tool changer positions 4
Vacuum pump 100 m³/h
CNC type XILOG PLUS
-------------------
Weight 3000 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status
Datasheet SCM Tech Z27
Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024

Description

WORKPLACE numerical control SCM MOD. TECH Z27 opportunity to FRESADOS, cuts, recesses, drills, ETC ...

Base and structure of the machine made of welded steel bars and stabilized to ensure maximum strength and constant performance over time.
The axis movements are ralizados by the crossbar holder work units to move longitudinally relative to the table, performs the movement of the X axis
In the same bar they are orthogonally mounted a pair of cars that carried the movements of the axes "Y" and "Z". This machine configuration is especially appreciated by the small size occupied in relation to labor camps.

The movements of the axis "X" axis the bar "and" are made using standard rotary screw and screw preloaded recirculating ball ;: fixed solution that ensures perfecfto axis positioning even at high travel speeds and also avoiding dangerous vibrations resulting in premature wear of the screw.

The movement of the axis "Z" is performed by rotating screw with recirculating ball screw and preloaded fixed pattern and is supported by a pneumatic piston to balance the weight of the moving parts; is provided along with improvised frenjo if a power failure.

Sliding of the carriages is effected inserted in interchangeable guides hardened and rectified by recirculating roller bearings preloaded with four rings contato; these are provided for double oil seal to ensure the necessary protection against dust and debris machining.

The axis movement is powered by alternating current servo type in "Brushless" controlled analog drives.
- Worktable dimensions 2,650 x 1,240 mm
- Race Z axis 200 mm
- Area of axis and vertical bores 1018 mm
- Area of axis milling and 180 mm
- Step board 180 mm
- Maximum thickness of the board 100 mm
- Z axis stroke 200 mm
- Porta-bits vertical No. 15
- Porta-horizontal drills No. 2 + 2 in X 1 + 1 grooving saw in Y
- Machine weight (including control cabinet) 3000 kg
- Vector speed axes (X-Y) 54 mm
- Z axis linear speed 11.5 m / min
- Rotation holder drills 4,000 g / min-rpm
- Engine rotation holder bits 2.2 (3) KW (Hp)
- Engine disk Strawberry 2.2 (3) KW (Hp)
- Speed of the milling cutter 6,000 m / min
- Power of the working units 6,6-7,5-9 (9-10-12) KW (HP)
- Max speed of rotation of the working units (6.6 to 7.5 KW) 24,000 g / min-rpm
- Mx rotation speed of the working units (KW 9) 18,000 g / min-rpm
- Power for horizontal milling machining unit 3 KW - (4) (HP)
- Operator speed horizontal milling group to 15,000 g / min-rpm
- Installed power (depending on the installed groups) 7.5 kw
- Compressed air pressure 6/7 atm
- Compressed air consumption 150 Nl / cycle
- Vacuum pump m3 / hour - 40 hour (100-250 opt)
- Diameter suction hood without the collector 160 + 200 + 200 mm
- Diameter suction hood with 300 mm collector
- Control Office PC
MACHINE WITH DOCUMENTATION AND REGULATIONS CE

- CHARGER 8 REAR TOOLS
- WORK TABLE WITH 6 BARS WITH EMPTY INTERIOR
- 4 collators
- 4 golf WORK
- REMOTE CONTROL

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

X stroke 3050 mm
Y stroke 1300 mm
Z stroke 180 mm
Axis nbr 3
Tool changer positions 4
Vacuum pump 100 m³/h
CNC type XILOG PLUS
-------------------
Weight 3000 kg
Worked hours
Hours under power
State excellent
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2020
Offers online 29
Last activity March 28, 2024