Sorry, this offer is no longer available on Exapro

OTT Pacific V6-F Edgebander

Here is a selection of similar machines

Gluing and Editing : veneer , plastic and solid edges .
Umleimerstärke : 0.2 -8.0 mm
Werkstueckabmessungen : minimum width 70 mm
Height of at least 8 mm
Maximum height of 42 mm
Duration minimum 160 mm
Strip edges 60 mm edge of the endless roller 150 mm with Doppelkappgeraet Operating voltage: 400 V, 50 Hz
Throughput speed : 12 m / min.
Adhesive coating : about application roller Working height: 800 mm
Air: 6 bar 1/ 4 "
Machine dimensions :
Machine height: 1300 mm
Machine width : 900 mm
Machine length : 5300 mm
Machine weight: 2100 kg
Total power : 12.5 kW
Machine equipped with:
Double roll-top pressure with motorized positioning via program control . - Einzelzufuehrungsmagazin for stripe and solid edges .
Automatic roll magazine for rolls up to 800 mm diameter with pneumatic cutter to 3 mm thickness . - Quick heating for hot melt adhesive granule . Heating time 8 min. With electronic temperature regulation. - Automatic reversing the glue dosage. Co-and counter - running for Duenn or solid edges over PLC. - Automatic infeed fence , so no manual adjustments necessary to edge thickness . - All units of central and networked with the PLC control panel pneumatically controlled. - Any disturbances will be immediately on the control panel displayed in plain text (eg compressed air deficiency or trigger a motor protection switch ) . - For user comfort with modern and practical control in the dialog man - machine. Program memory with name and numbers program. DOPPELKAPPGERAeT - with 2 HF motors 0,3 kW , 12,000 n 2 automatic positions = 0 + 3 grade 2 carbide saw blades 140 x 3.2 x 16 mm , Z 36 B &Ue; NDIGFRAeSGERAeT - for flush trimming of solid edges and rough milling of plastic and veneer edges. Unidirectional groping with 2 HF motors 0,7 kW , 12,000 n 2 HM Wendeplattenkoepfe 70 x 20 x 16 mm , Z 4 FEINFRAeSGERAeT - with 2 HF motors 0,3 kW , n 12000 , Two Pages groping automatically downscale . With quick-change device for upper and lower Laengsfraesen of chamfers and radii on plastic , PVC and wood edges. Basic equipment with 2 HM Wendeplattenfuegemesser heads 70x20x16 mm , Z4 , for bevel trimming . The bevel - fraesen can be performed in 3 positions 15 ° / 30 ° / 45 ° . ZIEHKLINGENGERAeT - two-sided groping automatically downscale . For extracting rounded PVC and plastic edges. ECKENABRUNDGERAeT - with 2 motors , 0.3 kW 12000 s , 200 Hz , two-sided groping , each one working spindle for above / with 2 HM Wendeplattenmesserkoepfen AR 73 below , 73 x 16 x 16 , Z 3 ( for profile diameter R 2 - R 5 ) F &Ue; MANAGEMENT PROCESSING PART - to append chipboard with 2 HF motors 1,5 kW , 12000 n , in the direct and counter-rotation working , automatically controlled , including DIA MAX DIA Fuegesatz Ø 85 x 30 x 42 , Z 3, System LEUCO for plate thickness up to 40 mm Accessories: AWS -R quick-change device for radius - milling on Feinfraesgeraet , with 2 HF motors 0,3 kW , 12000 , n 2 Abrundmesserkoepfe 73 x 16 x 16 mm , Z3 for profile knives R2 to R5 ZKF flat scraping unit with fine scanning for removing glue residues and fine Kunststoffkantenueberstaenden on Plattenoberflaeche in the joint area GS controlled spraying device on Kantenflaeche electronically , for spraying Antistatic slip / release Agent Type NFLY on Kunststoffkantenoberflaeche Technical Note: The Profilgroesse of radius tools is R 2

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Board thickness 8 mm
Edge thickness 8 mm
Feed advance 12 m/min
-------------------
Length x width x height 5300.0 × 900.0 × 1300.0
Weight 2100 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Datasheet OTT Pacific V6-F
Client type Reseller
Active since 2014
Offers online 0
Last activity June 19, 2023

Description

Gluing and Editing : veneer , plastic and solid edges .
Umleimerstärke : 0.2 -8.0 mm
Werkstueckabmessungen : minimum width 70 mm
Height of at least 8 mm
Maximum height of 42 mm
Duration minimum 160 mm
Strip edges 60 mm edge of the endless roller 150 mm with Doppelkappgeraet Operating voltage: 400 V, 50 Hz
Throughput speed : 12 m / min.
Adhesive coating : about application roller Working height: 800 mm
Air: 6 bar 1/ 4 "
Machine dimensions :
Machine height: 1300 mm
Machine width : 900 mm
Machine length : 5300 mm
Machine weight: 2100 kg
Total power : 12.5 kW
Machine equipped with:
Double roll-top pressure with motorized positioning via program control . - Einzelzufuehrungsmagazin for stripe and solid edges .
Automatic roll magazine for rolls up to 800 mm diameter with pneumatic cutter to 3 mm thickness . - Quick heating for hot melt adhesive granule . Heating time 8 min. With electronic temperature regulation. - Automatic reversing the glue dosage. Co-and counter - running for Duenn or solid edges over PLC. - Automatic infeed fence , so no manual adjustments necessary to edge thickness . - All units of central and networked with the PLC control panel pneumatically controlled. - Any disturbances will be immediately on the control panel displayed in plain text (eg compressed air deficiency or trigger a motor protection switch ) . - For user comfort with modern and practical control in the dialog man - machine. Program memory with name and numbers program. DOPPELKAPPGERAeT - with 2 HF motors 0,3 kW , 12,000 n 2 automatic positions = 0 + 3 grade 2 carbide saw blades 140 x 3.2 x 16 mm , Z 36 B &Ue; NDIGFRAeSGERAeT - for flush trimming of solid edges and rough milling of plastic and veneer edges. Unidirectional groping with 2 HF motors 0,7 kW , 12,000 n 2 HM Wendeplattenkoepfe 70 x 20 x 16 mm , Z 4 FEINFRAeSGERAeT - with 2 HF motors 0,3 kW , n 12000 , Two Pages groping automatically downscale . With quick-change device for upper and lower Laengsfraesen of chamfers and radii on plastic , PVC and wood edges. Basic equipment with 2 HM Wendeplattenfuegemesser heads 70x20x16 mm , Z4 , for bevel trimming . The bevel - fraesen can be performed in 3 positions 15 ° / 30 ° / 45 ° . ZIEHKLINGENGERAeT - two-sided groping automatically downscale . For extracting rounded PVC and plastic edges. ECKENABRUNDGERAeT - with 2 motors , 0.3 kW 12000 s , 200 Hz , two-sided groping , each one working spindle for above / with 2 HM Wendeplattenmesserkoepfen AR 73 below , 73 x 16 x 16 , Z 3 ( for profile diameter R 2 - R 5 ) F &Ue; MANAGEMENT PROCESSING PART - to append chipboard with 2 HF motors 1,5 kW , 12000 n , in the direct and counter-rotation working , automatically controlled , including DIA MAX DIA Fuegesatz Ø 85 x 30 x 42 , Z 3, System LEUCO for plate thickness up to 40 mm Accessories: AWS -R quick-change device for radius - milling on Feinfraesgeraet , with 2 HF motors 0,3 kW , 12000 , n 2 Abrundmesserkoepfe 73 x 16 x 16 mm , Z3 for profile knives R2 to R5 ZKF flat scraping unit with fine scanning for removing glue residues and fine Kunststoffkantenueberstaenden on Plattenoberflaeche in the joint area GS controlled spraying device on Kantenflaeche electronically , for spraying Antistatic slip / release Agent Type NFLY on Kunststoffkantenoberflaeche Technical Note: The Profilgroesse of radius tools is R 2

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Board thickness 8 mm
Edge thickness 8 mm
Feed advance 12 m/min
-------------------
Length x width x height 5300.0 × 900.0 × 1300.0
Weight 2100 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2014
Offers online 0
Last activity June 19, 2023