Sorry, this offer is no longer available on Exapro

Omga T521OPT 4000 Optimizing Cut-Off Wood saw

Here is a selection of similar machines

Automatic programmable cut-off saw for optimized cutting of wood stock and defect removal

Suitable for any production requirement

Through a unique laser system, the operator can grade the board and mark the defects to be removed

The machine is equipped with a controller capable of performing five work cycle programs

The onboard computer is able to store cutting lists with lengths divided in two different grades and the relevant quantity of parts

Cutting lists can be input direct for the NC keypad or with direct serial connection to a remote PC

Maximum material width - 12-5/8"

Maximum material thickness - 5-1/2"

Maximum infeed length - 13'

Maximum feed speed - 330 FPM

7 HP saw motor

18" diameter blade capacity; cutting speed - .5 to 1 second

Average number of cuts per minute - 25 to 30

Saw set and infeed set up on a 10 degree incline to ensure material stays against back fence

Maximum material width 12-5/8"
Maximum material thickness 5-1/2"
Maximum infeed length 13'
Maximum feed speed 330 FPM
Saw motor 7 HP
Diameter blade capacity 18"
Cutting speed .5 to 1 second
Average number of cuts per minute 25 to 30

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Cutting width 327.7 mm
Cutting height 139.7 mm
Engine power 5.2 kW
-------------------
Worked hours
Hours under power
State like new
At local norms ---------
Status
Client type Reseller
Active since 2011
Offers online 0
Last activity Aug. 22, 2020

Description

Automatic programmable cut-off saw for optimized cutting of wood stock and defect removal

Suitable for any production requirement

Through a unique laser system, the operator can grade the board and mark the defects to be removed

The machine is equipped with a controller capable of performing five work cycle programs

The onboard computer is able to store cutting lists with lengths divided in two different grades and the relevant quantity of parts

Cutting lists can be input direct for the NC keypad or with direct serial connection to a remote PC

Maximum material width - 12-5/8"

Maximum material thickness - 5-1/2"

Maximum infeed length - 13'

Maximum feed speed - 330 FPM

7 HP saw motor

18" diameter blade capacity; cutting speed - .5 to 1 second

Average number of cuts per minute - 25 to 30

Saw set and infeed set up on a 10 degree incline to ensure material stays against back fence

Maximum material width 12-5/8"
Maximum material thickness 5-1/2"
Maximum infeed length 13'
Maximum feed speed 330 FPM
Saw motor 7 HP
Diameter blade capacity 18"
Cutting speed .5 to 1 second
Average number of cuts per minute 25 to 30

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Cutting width 327.7 mm
Cutting height 139.7 mm
Engine power 5.2 kW
-------------------
Worked hours
Hours under power
State like new
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2011
Offers online 0
Last activity Aug. 22, 2020