Sorry, this offer is no longer available on Exapro

HOMAG KF26/7/A3/25 Edgebander

Here is a selection of similar machines

Double sided squaring and edge banding machine
Edges up to 3 mm thickness
First and second pass machine
Panel feed by rolling chain
Top pressure by driven V-belts
Width adjustment over linear slideways
Feed speed 10 to 32 m/min
Panel outstand 30-80 mm.
Workpiece thickness 12 to 40 mm.
Working height: 950 mm.
Working width, double sided min. 240, max. 2500 mm.
Coil edges 0,3 to 3 mm., coil-diameter 900 mm.
Equipment left and right:
1 Infeed rollers
1+1 Long infeed chain, machine II + 1000 mm
Squaring part:
1+1 Jump milling motor 4,5 kW, 100 Hz
2+2 Motors 4,5 kW forming the compact hogging unit
1+1 Panel cleaning devices
Edging part (Kompakt A3):
1+1 Hot melt unit Q34
1+1 6-fold coil magazine and guillotine for edges up to 3 mm.
1+1 Pressure zone K with 2 driven and 4 non driven rollers
1+1 Top/bottom trimming HL81 0,18 kW Motors
1+1 Rough trimming, 2 x 0,55 kW
1+1 Fine- or radius trimming, 2 x 0,4 kW
1+1 Contour trimming FF 12, Motors 0,4 kW
1 Universal jump shaping/grooving unit, with tracing, 4 kW Motor
1+1 Profile scraper
1+1 Buffing with oscillation
Controlls NC 21

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

Double sided squaring and edge banding machine
Edges up to 3 mm thickness
First and second pass machine
Panel feed by rolling chain
Top pressure by driven V-belts
Width adjustment over linear slideways
Feed speed 10 to 32 m/min
Panel outstand 30-80 mm.
Workpiece thickness 12 to 40 mm.
Working height: 950 mm.
Working width, double sided min. 240, max. 2500 mm.
Coil edges 0,3 to 3 mm., coil-diameter 900 mm.
Equipment left and right:
1 Infeed rollers
1+1 Long infeed chain, machine II + 1000 mm
Squaring part:
1+1 Jump milling motor 4,5 kW, 100 Hz
2+2 Motors 4,5 kW forming the compact hogging unit
1+1 Panel cleaning devices
Edging part (Kompakt A3):
1+1 Hot melt unit Q34
1+1 6-fold coil magazine and guillotine for edges up to 3 mm.
1+1 Pressure zone K with 2 driven and 4 non driven rollers
1+1 Top/bottom trimming HL81 0,18 kW Motors
1+1 Rough trimming, 2 x 0,55 kW
1+1 Fine- or radius trimming, 2 x 0,4 kW
1+1 Contour trimming FF 12, Motors 0,4 kW
1 Universal jump shaping/grooving unit, with tracing, 4 kW Motor
1+1 Profile scraper
1+1 Buffing with oscillation
Controlls NC 21

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024