The HACO OMATIC 130 DTRH turret press, manufactured in 2014 in Belgium, is designed for precise punching of shapes and holes of various sizes in metal sheets. The machine is operated manually by an operator who, using a special device, changes the punching tools and places the sheet on the work table. The processed detail is punched out with a force of 30 tons and can be up to 4000 mm long, 1500 mm wide, 6.5 mm thick and weigh up to 150 kg.

The punching machine has a brush table that significantly reduces the noise level and protects the sheet surface against various scratches. Three hydraulic clamps are mounted on the table, holding the sheet during the punching process. Depending on the selected mode, the machine performs from 1000 to 1500 beats per minute. The installed TPC 69C Graphics CNC controller allows for graphic programming of the desired shapes. The total weight of the machine is 8,700 kg.

Technical parameters of the HACO OMATIC 130 DTRH turret press

- punching force: 30 t
- maximum sheet length: 4000 mm
- maximum sheet width: 1500 mm
- maximum sheet thickness: 6.5 mm
- maximum workpiece weight: 150 kg
- impact speed, marking mode: 1500 1 / min
- impact speed nibbling mode: 1000 1 / min
- feeds in the X / Y / Z axes: 2010/1510/37 mm
- accelerated feeds in the X / Y axes: 64 m / min
- positioning accuracy in the X / Y / Z axes: +/- 0.05 mm
- programming accuracy in the X / Y / Z axes: 0.01 mm
- maximum tool diameter: 70 mm
- total power consumption: 25 kW
- compressed air pressure: 6 bar
- power supply: 380 V 50 Hz
- dimensions (L x W x H): 3400 x 3200 x 2500 mm
- weight of the machine OMATIC 130 DTRH: 8700 kg

Equipment of the HACO OMATIC 130 DTRH punching machine

- CNC controller: TPC 69C Graphics
- a set of punching tools
- manual device for changing punching tools
- brush table
- hydraulic sheet clamps: 3 pcs.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Power in tons 30 T
Metal length 4000 mm
CNC type TPC 69C Graphics
Metal width 1500 mm
Max steel thickness 6.5 mm
Max. Weight of the workpiece 150 kg
-------------------
Length x width x height 3400.0 × 3200.0 × 2500.0
Weight 8700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Description

The HACO OMATIC 130 DTRH turret press, manufactured in 2014 in Belgium, is designed for precise punching of shapes and holes of various sizes in metal sheets. The machine is operated manually by an operator who, using a special device, changes the punching tools and places the sheet on the work table. The processed detail is punched out with a force of 30 tons and can be up to 4000 mm long, 1500 mm wide, 6.5 mm thick and weigh up to 150 kg.

The punching machine has a brush table that significantly reduces the noise level and protects the sheet surface against various scratches. Three hydraulic clamps are mounted on the table, holding the sheet during the punching process. Depending on the selected mode, the machine performs from 1000 to 1500 beats per minute. The installed TPC 69C Graphics CNC controller allows for graphic programming of the desired shapes. The total weight of the machine is 8,700 kg.

Technical parameters of the HACO OMATIC 130 DTRH turret press

- punching force: 30 t
- maximum sheet length: 4000 mm
- maximum sheet width: 1500 mm
- maximum sheet thickness: 6.5 mm
- maximum workpiece weight: 150 kg
- impact speed, marking mode: 1500 1 / min
- impact speed nibbling mode: 1000 1 / min
- feeds in the X / Y / Z axes: 2010/1510/37 mm
- accelerated feeds in the X / Y axes: 64 m / min
- positioning accuracy in the X / Y / Z axes: +/- 0.05 mm
- programming accuracy in the X / Y / Z axes: 0.01 mm
- maximum tool diameter: 70 mm
- total power consumption: 25 kW
- compressed air pressure: 6 bar
- power supply: 380 V 50 Hz
- dimensions (L x W x H): 3400 x 3200 x 2500 mm
- weight of the machine OMATIC 130 DTRH: 8700 kg

Equipment of the HACO OMATIC 130 DTRH punching machine

- CNC controller: TPC 69C Graphics
- a set of punching tools
- manual device for changing punching tools
- brush table
- hydraulic sheet clamps: 3 pcs.

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Power in tons 30 T
Metal length 4000 mm
CNC type TPC 69C Graphics
Metal width 1500 mm
Max steel thickness 6.5 mm
Max. Weight of the workpiece 150 kg
-------------------
Length x width x height 3400.0 × 3200.0 × 2500.0
Weight 8700 kg
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2010
Offers online 377
Last activity March 28, 2024

Here is a selection of similar machines

Haco Omatic 130 DTRH CNC punching machine