Sorry, this offer is no longer available on Exapro

BIESSE STREAM B1 9.5 Edgebander

Here is a selection of similar machines

BRAND BIESSE
TYPE STREAM B1 9.5
YEAR OF CONSTRUCTION 2001
TENSION 380V 50Hz 3Ph
DESCRIPTION Edges: coils 0,3 to 3 mm, strips 0,4 to 20 mm
Panel thickness: 10 - 60 mm
Min/max panel width 65 / 1500 mm (panel pass 35 mm)
Min panel length 100 mm
Feedspeed 18 - 24 m/min
Equipment:
- squaring device, 2 x 3,7 kW motors
- 6-fold coil magazine, coil diameter 800 mm, edge height 15 - 65 mm
- hot melt unit, type SP 3
- lateral pressure rollers
- end trims type IT45, 2 x 0,37 kW (edges up to 3 mm)
- rough trimming type RS 10, 2 x 0,83 kW, 12000 r/min
- fine trimming type RF 40, 2 x 0,55 kW, 12000 r/min
- contour trimming
- profile scraping RB40
- glue scraping
- hot air blowers PH10, 3,4 kW
Electronic line controll
Programming and saving of feed speed, panel thickness, position of pressure rollers, position of trimming units etc

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase

Edge thickness 3 mm
Feed advance 24 m/min
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status
Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024

Description

BRAND BIESSE
TYPE STREAM B1 9.5
YEAR OF CONSTRUCTION 2001
TENSION 380V 50Hz 3Ph
DESCRIPTION Edges: coils 0,3 to 3 mm, strips 0,4 to 20 mm
Panel thickness: 10 - 60 mm
Min/max panel width 65 / 1500 mm (panel pass 35 mm)
Min panel length 100 mm
Feedspeed 18 - 24 m/min
Equipment:
- squaring device, 2 x 3,7 kW motors
- 6-fold coil magazine, coil diameter 800 mm, edge height 15 - 65 mm
- hot melt unit, type SP 3
- lateral pressure rollers
- end trims type IT45, 2 x 0,37 kW (edges up to 3 mm)
- rough trimming type RS 10, 2 x 0,83 kW, 12000 r/min
- fine trimming type RF 40, 2 x 0,55 kW, 12000 r/min
- contour trimming
- profile scraping RB40
- glue scraping
- hot air blowers PH10, 3,4 kW
Electronic line controll
Programming and saving of feed speed, panel thickness, position of pressure rollers, position of trimming units etc

Please note that this description may have been translated automatically. Contact us for further information. The information of this classified ad are only indicative. Exapro recommends to check the details with the seller before a purchase


Specifications

Edge thickness 3 mm
Feed advance 24 m/min
-------------------
Worked hours
Hours under power
State good
At local norms ---------
Status

About this seller

Client type Reseller
Active since 2019
Offers online 76
Last activity March 27, 2024